How To Install A Skylight On A Metal Roof

Putting a skylight on your metal roofing is one of the best ways to bring more natural light into the house. However, working with a metal roof can be quite tricky. It requires an expert to install a skylight properly.

If you decide to DIY, you need to know how to get around it. And that is what we will share in this guide – how to install skylights on metal roofs.

Can You Install Skylights on a Metal Roof?

Many people hesitate to install metal roofs on their homes because they want skylights installed. They think metal panels are not compatible with these systems. But that is not true.

Despite what anyone else says, you can add light-transmitting panels on your metal roof to make your home brighter. Installing deck-mounted skylights or any other type on these roofs is possible.

However, there are several things to consider before making that decision. Options like curb-mounted skylight solutions can be a bit tricky to install. And that is why you must understand how to set them properly to prevent leaks and similar issues. We shall discuss these considerations below:

How To Install A Skylight On A Metal Roof

As stated above, installing skylights on metal roof panels is possible, but it can be a bit tricky. Don’t worry, though. This guide will share the most straightforward steps to do it.

Considerations

Consider the following factors before adding skylights to your house.

• Get professional installation. Curb-mounted skylights must be installed correctly to keep your roof safe. You may end up with a flush-mounted instead of a curb-mounted skylight, which may eventually leak. A professional installer will ensure this never happens.
• Prepare for the noise. It can get quite noisy when you start to install skylights on a metal building. Also, the rain from rain hitting on the metal is often a major concern for many homeowners.
• Possible energy loss. Installing a flashlight can potentially affect your energy savings. They lose some heat during winter and allow in more during summer.
• A flashing system is essential. You need to create a good defense against water damage. And the best way to do so is by using a sealant. Flashing plays a very crucial role here.

With these tips factors in mind, you are now ready to start installing the skylight.

Choose the right type

The types of skylight you choose and the installation method will determine your experience. Talk to your roofing contractor to recommend the best solutions in your region. For instance, a Velux skylight should be the best choice for anyone who wants top performance. In terms of style, curb-mounted and deck-mounted skylights are the best options for metal roofs.

Consider the metal roof type

You need to know if your metal roof is compatible with the skylight for maximum benefits. For instance, flashing kits are essential for certain roofs more than others. This can only happen if you know the roof properly.

Contact your local roofer before any DIY project

Skylights provide more light into your house. However, many homeowners get into it without a proper plan and end up regretting it. Contact your local roofer for advice to avoid rain hitting the wrong side of the house. They will know where to place it.

Choose the right location

One of the best ways to reduce energy loss through skylights is by placing them strategically. For instance, you may want the skylight to face away from direct sunlight to avoid too much hit during summer. Remember this to avoid re-roofing the entire structure when the heat becomes too much.

Measure the area properly

You need the skylight installed properly into a fitting position. It is best to install them during a re-roofing project. However, if you must install it on an existing roof, ensure the space is properly measured to fit the skylight. This prevents extra space that can be hard to fill and may cause water damage.

Replace and secure the panel

Now that you are done with the installation, it’s time to work on finishing up. Use screws and sealants to replace the panel and align the seams properly. Next, check if the ventilation has been affected during the process and fix it. Now secure everything properly before clearing the working area.

Best Types of Skylights for Metal Roofs

Installing the best type is one of the best ways to deal with skylights. Velux skylights are divided into various categories to ensure compatibility and efficiency. They include:

Exposed fasteners

These are the most common option. It comes with a clear flat area between and can easily match profiles of 1 ½ inches or below.

Concealed fastener

If you are looking for the perfect and yet hidden fasters, choose a concealed option. It also works for profiles under 1 ½.

Continuous corrugated

These systems come with continuous rolling profiles without any flat area between the seams. They are high-profile solutions perfect for any metal roof.

Let Experts Help You

Are you ready to install a skylight on your metal roof but don’t know where to begin? Consider hiring an expert roofer for the job. Hiring a professional skylight can save you a lot of money and time. They have the right tools and equipment to deliver a good job.

Vista Roofing, for instance, is a reputable and experienced roofer with a proven track record. The team will address your every concern, install a suitable skylight and offer free tips for proper care. Besides, they are quite affordable, offering various packages to meet different needs.